返回首页
当前位置: 主页 > 航空资料 > 机务资料 >

A320飞机维护手册 AMM 指示/记录系统 4

时间:2011-03-25 12:16来源:蓝天飞行翻译 作者:admin 点击:
曝光台 注意防骗 曝光赚黑心钱的骗子公司北京大地印象装饰装潢有限公司 谨防上当
  

 

 

 3. Job Set-up
__________
 Subtask 31-36-00-860-061

 A. Aircraft Maintenance Configuration
 (1)
 Energize the aircraft electrical circuits
 (Ref. TASK 24-41-00-861-002)


 (2)
 Energize the CFDS.


R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 31-36-00Page 236 1201-210, 1May 01/05 1 1 1CES 1 Subtask 31-36-00-865-068


 B. Make sure that this(these) circuit breaker(s) is(are) closed:
 -------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
 -------------------------------------------------------------------------------
121VU FDIU & QAR 8TU K17 121VU AIDS/DMU 4TV K15 121VU ENGINE/ENG1 AND 2/EVMU 1EV R44
 4. Procedure
_________ R **ON A/C 001-049, 051-099, 101-105,
 Subtask 31-36-00-740-058
 A. AIDS DMU Programming Procedure.
 (1) Get access to the PROGRAMMING MENU.
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
On the MCDU:  On the MCDU display:
 - Push the MCDU MENU mode key.  - The MCDU MENU page comes into view.
 - Push the line key adjacent to <  - The AIDS page comes into view.
 AIDS indication.
 - Push the line key adjacent to <  - The PROGRAMMING page comes into view.
 PROGRAMMING indication.
 - Enter the Password with the
 alphanumeric keys.
 NOTE : The password is defined via____
 GSE (Standard = SFIM).
 - Push the line key adjacent to <  - The PROGRAMMING MENUS indication
 ENTER PASSWORD indication.  becomes cyan.
 - The '<' mark adds to the <
 PROGRAMMING MENUS indication. 

R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 31-36-00Page 237 1201-210, 1May 01/05 1 1 1CES 1


 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
- Push the line key adjacent to <  - The AIDS DMU PROGRAMMING page comes
 PROGRAMMING MENUS indication.  into view.
 Subtask 31-36-00-740-063
 B. Programmable Report Inhibit

 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
On the MCDU:
-
Push the line key adjacent to < REPORT INHIBIT indication.

-
Push the line key adjacent to * YES PRINT or PRINT NO * indication to set the print function.

-
Push the line key adjacent to * YES LINK or LINK NO * indication to set the ACARS downlink function.

-
Push the line key adjacent to < RETURN indication.


On the MCDU display:
-The AIDS REPORT INHIBIT page comesinto view.
-
If the print function is set the lineshows YES PRINT NO *.

-
If the print function is not set the line shows * YES PRINT NO.

-
If the ACARS downlink function is setthe line shows YES LINK NO *.

-
If the ACARS downlink function is notset the line shows * YES LINK NO.


-The AIDS DMU PROGRAMMING page comesinto view.
R 1EFF : 001-049, 051-099, 101-105, 1 31-36-00Page 238 1 1 May 01/05 1 1 1CES 1 Subtask 31-36-00-740-064


 C. Programmable Report Limits.
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
On the MCDU:
-Push the line key adjacent to < REPORT LIMITS indication.
-Enter the Parameter Number of the Limit Table with the alphanumeric keys.
 -Push the line key adjacent to PARAM NB <- XXXX indication to take over the Parameter Number.
-Enter the new Limit value with the alphanumeric keys.
-Push the line key adjacent to the arrow below the NEW LIMIT indication to take over the new Limit value.
 -Enter the Validity value with the alphanumeric keys in the format as follows: two digits + LEG: 'XXLEG'(e.g. 10LEG) or three digits + DAY: 'TTTDAY'(e.g. 123DAY).
 -Push the line key adjacent to the arrow below the VALIDITY indication to take over the new Validity value.
 -Enter the Reason of the Report Limit Change with the alphanumeric keys.
On the MCDU display:
-
The AIDS REPORT LIMITS page comesinto view.

-
The Parameter Number shows on thebottom of the display (scratchpad).


-On the AIDS REPORT LIMITS page addsfollowing indication:OLD LIMIT, NEW LIMIT, VALIDITY, REASON, VALIDATE and RETURN TO DEFAULT.
 
中国航空网 www.aero.cn
民航翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM 指示/记录系统 4
 

------分隔线----------------------------